Blue Thumb 30 PSI Regulator

MPN: 30PSI

Pressure Regulating Limit Valve for use with your Auto Fill Kit

For use with your Automatic Water Fill Kit when psi is greater than 30.

• Caution: Do not disassemble the pressure regulator. A compressed spring is contained within and could cause injury if disassembled.
• This regulator is designed to operate with clean water. If a filter is required, it should be 100 mesh or finer and capable of flowing up to 18 gallons per minute with no more than 5 PSI internal friction loss.
• The maximum inlet pressure is 125 PSI.
• If using a thread sealant, use only Teflon tape.
• The water flow direction must match the arrow shown on the regulator.
• Use with Blue Thumb fountain basins, pond skimmers, Pump Canyons®, and Formal Falls® basins.